Wood Pet Kennel

Wood-Pet-Kennel-fb

[infobox]
[supply]1 – 24″ x 36″ Pine Project Panel or 3/4″ plywood or MDF[/supply]
[supply]5 – 1×3 Boards, 8′ Long[/supply]
[supply]1 – sheet of 1/4″ plywood[/supply]
[supply]4 – 1×2 Boards, 8′ Long[/supply]
[supply]1 – set of hinges[/supply]
[supply]1 – latch[/supply]
[supply]1 1/4″ pocket hole screws[/supply]
[supply]Wood glue[/supply]
[supply]7/8″ wood screws (or shorter)[/supply]
[supply]Wood glue[/supply]
[supply]Wood filler[/supply]
[supply]120 grit sandpaper[/supply]
[supply]Primer[/supply]
[supply]Wood conditioner[/supply]
[supply]Paint[/supply]
[tool]Paint brush[/tool]
[tool]Measuring tape[/tool]
[tool]Square[/tool]
[tool]Pencil[/tool]
[tool]Safety glasses[/tool]
[tool]Hearing protection[/tool]
[tool]Kreg Jig™[/tool]
[tool]Drill[/tool]
[tool]Circular saw[/tool]
[tool]Sander[/tool]
[tool]Countersink drill bit[/tool]
[/infobox]

Wood-Pet-Kennel-01

Wood-Pet-Kennel-02